Custom Bent J-Bolts With Drilled Hole – 18-8 Stainless Steel

Posted by alex@engineeredsource.com
On February 15, 2022
0 Comments

These custom bent j-bolts with drilled hole were manufactured domestically using 18-8 stainless steel material with plain finish. 3/8-16 Thread was incorporated at a length of 1.25″ and the distance center to center between the legs was set to 1.38″ +/- 1/16″. Inside length at the long let was 2.25″. Material certs were included with […]

Custom Stamped Bent L-Shaped Bolts

Posted by alex@engineeredsource.com
On July 29, 2021
0 Comments

These custom stamped bent L-shaped bolts were manufactured with a cold formed/stamped stop shoulder critical to the assembly application. 5/16-18 thread was incorporated underneath the shoulder/flange feature, at approximately 14.42mm in length. The unthreaded length measures 31mm on the outside and the flange/shoulder diameter is 17.5mm. Zinc + clear finish was applied to complete the […]

Custom Lag Thread Bent Anchors – Steel Zinc Material

Posted by alex@engineeredsource.com
On July 16, 2020
0 Comments

These custom lag thread bent anchors were manufactured for a woodworking company in Hawaii that required lag screw thread on the long leg and a cosmetically appealing zinc clear finish. CD-C1018 material was used at a 1/4″ in diameter, with a 90 degree bend. The short leg measured 3/4″ in length on the inside and […]

Custom Domestic L Anchor Bolts – ASTM A675 Grade 80

Posted by alex@engineeredsource.com
On June 2, 2020
0 Comments

We supplied approximately 450 pieces of these custom domestic L anchor bolts to our construction engineering customer, with full certs. The parts had to be domestic made using domestic melt material as well in ASTM A675 Grade 80 steel, with plain finish. 1/2-13 thread was incorporated on the 15″ long leg, with 13.5″ of actual […]

Custom Construction Bent Anchors – 1-1/4″ by 39.37″ In A36 Material

Posted by alex@engineeredsource.com
On April 29, 2020
0 Comments

These custom construction bent anchors were manufactured domestically using A36 material with plain finish. 1-1/4″ bar stock was used and the threaded portion was turned down to allow for cutting M42 thread. Overall length was set at 1,000MM or 39.37″, with the outside hook measuring 180MM. Tricky part to bend within tolerance but ended up […]

Custom Large Anchor Bolts – F1554 Grade 36 Material, Galvanized

Posted by alex@engineeredsource.com
On November 18, 2019
0 Comments

These custom large anchor bolts were manufactured domestically using F1554 grade 36 material for the threaded anchors, F436 material for the washers, and A563 material for the nuts. All parts were 2″ in diameter with coarse thread, with galvanized finish. The large anchor bolts measured 6 feet in overal length and each was provided with […]

Custom Galvanized Anchor Bolts – A36 Steel, Galvanized

Posted by alex@engineeredsource.com
On October 30, 2019
0 Comments

These custom galvanized anchor bolts were manufactured domestically with a rush timeline using A36 steel material with a galvanized finish. 7 inches of 1″-8 coarse thread was incorporate on the long leg, with cut thread as opposed to a rolled alternative. Overall length was set at 17″ and the length of the short leg on […]

Custom Bent Eye Bolts & U-Bolts In A36 Steel Material – 3/4-10 Thread

Posted by alex@engineeredsource.com
On February 1, 2019
0 Comments

These custom bent eye bolts were produced together with matching large round u-bolts in A36 material. 3/4-10 thread was incorporated on both parts and 6 eye bolts were produced together with 21 u-bolts, a relatively small production run. Parts were produced within 4 days of order confirmation but could have been done faster with an […]

Custom 316 SS Bent Anchor Rods – Per AMS 5648

Posted by alex@engineeredsource.com
On June 15, 2018
0 Comments

These are custom 316 SS bent anchor rods per AMS 5648 we provided our customer in Arkansas. 130 pieces were domestically produced with a lead time of 4-5 weeks. Material certs, First Article Inspection Report (FAIR), and a certificate of conformance was provided with the parts as well. 1/4-20 thread was incorporated at 2.25″ in […]

Custom Bent Anchor Bolts – 1/2 X 5″ Bent Concrete Anchor Bolts in A449 Plain Steel Material

Posted by alex@engineeredsource.com
On May 12, 2018
0 Comments

One of the custom bent anchor bolts we have supplied to our construction customer at 12 pieces in April. Plain A449 material was used and the parts were ready to ship within 6 business days from order. 1/2 bar material was used and approximately 2 inches of coarse thread was incorporated on each leg. One […]

Page 1 of 212